[jhay]

These days I have been in contact with the developer iH8sn0w, the new tool that allows the release and jailbreak firmware 3.1 beta 3. Due to many bugs and restores, however, has clearly thought about writing a new tool that makes it possible to perform the procedure. Here is the guide to iSpazio, to run the Jailbreak and Unlock EDGE dell'iPhone, Italian dell'iPhone 3G and the iPod Touch 1G c on Windows 2.1 and iREB. DRIVING, OF COURSE, IS ONLY FOR PERSONS ENROLLED IN THE PROGRAM DEVELOPER APPLE.


Download:

• iREB 2.1 for Windows (Megaupload Link by iSpazio);
  
• Custom iPhone Firmware 2G/EDGE be used to restore from iTunes;
  
• IPhone 3G Custom Firmware to use to restore from iTunes;
  
• Custom Firmware 1G iPod Touch to be used to restore from iTunes;
  
• iTunes 8.2.1;

Requirements:

All owners of iPod Touch 1G must, before the procedure, to mount the 3.0 jailbroken firmware.


Guide:

1. If you have not already, switched off all your anti-virus containing a firewall may prevent the initiation of a process and not successful. Start, therefore, iREB previously downloaded and unzippato (run as administrator if you are using Windows Vista);

2nd We select the device from the main screen and jump all the safety notices that the program shows. Notifies us, in fact, that the restoration to the new beta firmware update our Baseband and, therefore, all users in possession of an iPhone 3G foreigner should NOT perform this procedure. Please note also that the firmware 3.1 beta 3 will become unusable as soon as it is output to the official version, available to all users.



3rd Come to a screen where, through a DOS-style window, the program will close all processes related to iTunes. This is a very important step that will determine the success or failure of the procedure. We suggest, therefore, to open the Task Manager (CTRL + ALT + DEL), go to "Processes" and watching the program that actually do its job properly.



4th Press, then "ENTER" and the program we suggest turning off the iPhone / iPod and put it into DFU mode. To do this you must:

• Connect the device to your computer and shut it down.
  
• Press the Home button ignition + 10 seconds then release the correct key Ignition continuing to press only Home.

If by chance, after the entry into DFU, you open iTunes, you return to the Task Manager, manually quit the two processes "iTunes.exe" and "iTunesHelper.exe", riapritelo close iREB and duplicating the procedure up to this point. Attention to remove the iPhone from DFU mode (Home + Power for 7 / 8 seconds).



5th Once everything is completed, press again "ENTER" and expect to finish the program to work. Notifies us, then, that the iPhone will have a white screen and we will call to restore (with the firmware previously downloaded) via iTunes.



6. Then open iTunes, expect that the program detects the iPhone or iPod in recovery mode, press "SHIFT + Restore" by selecting the custom firmware you downloaded previously. We await the end of the process and let's enjoy our firmware 3.1 beta 3 with Cydia installed!

NOTE: ALL owners of iPhone 3G foreigner must NOT perform this procedure. Restoration of the software to the new firmware version includes the update of Baseband and hence the impossibility of using ultrasn0w probably forever.

ALL HOLDERS OF IPHONE EDGE: All those who own an iPhone 2G you will find the telephone blocked at the end of the procedure. This is normal because during the restoration does not run the program release. To remedy the problem, follow these simple steps:

• Open Cydia;
  
• Change to the tab "Changes" and run all the updates;
  
• Reboot and reopen Cydia;
  
• Change to the tab "Search" and type "BootNeuter"
  
• Download and run the program;
  
• Select all the entries in the screenshot below and click "Flash". Wait and do nothing and as soon as the procedure is finished, enjoy your EDGE iPhone unlocked and jailbroken with firmware 3.1 beta 3.

The procedure was tested on my iPhone 3G successfully. I thank the developer of iH8sn0w that these days he has worked hard to complete the project. Good release!



this tutorial is from iSpazio [google translate]

[x-bot]

[jhay]

These days I have been in contact with the developer iH8sn0w, the new tool that allows the release and jailbreak firmware 3.1 beta 3. Due to many bugs and restores, however, has clearly thought about writing a new tool that makes it possible to perform the procedure. Here is the guide to iSpazio, to run the Jailbreak and Unlock EDGE dell'iPhone, Italian dell'iPhone 3G and the iPod Touch 1G c on Windows 2.1 and iREB. DRIVING, OF COURSE, IS ONLY FOR PERSONS ENROLLED IN THE PROGRAM DEVELOPER APPLE.


Download:

• iREB 2.1 for Windows (Megaupload Link by iSpazio);
  
• Custom iPhone Firmware 2G/EDGE be used to restore from iTunes;
  
• IPhone 3G Custom Firmware to use to restore from iTunes;
  
• Custom Firmware 1G iPod Touch to be used to restore from iTunes;
  
• iTunes 8.2.1;

Requirements:

All owners of iPod Touch 1G must, before the procedure, to mount the 3.0 jailbroken firmware.


Guide:

1. If you have not already, switched off all your anti-virus containing a firewall may prevent the initiation of a process and not successful. Start, therefore, iREB previously downloaded and unzippato (run as administrator if you are using Windows Vista);

2nd We select the device from the main screen and jump all the safety notices that the program shows. Notifies us, in fact, that the restoration to the new beta firmware update our Baseband and, therefore, all users in possession of an iPhone 3G foreigner should NOT perform this procedure. Please note also that the firmware 3.1 beta 3 will become unusable as soon as it is output to the official version, available to all users.



3rd Come to a screen where, through a DOS-style window, the program will close all processes related to iTunes. This is a very important step that will determine the success or failure of the procedure. We suggest, therefore, to open the Task Manager (CTRL + ALT + DEL), go to "Processes" and watching the program that actually do its job properly.



4th Press, then "ENTER" and the program we suggest turning off the iPhone / iPod and put it into DFU mode. To do this you must:

• Connect the device to your computer and shut it down.
  
• Press the Home button ignition + 10 seconds then release the correct key Ignition continuing to press only Home.

If by chance, after the entry into DFU, you open iTunes, you return to the Task Manager, manually quit the two processes "iTunes.exe" and "iTunesHelper.exe", riapritelo close iREB and duplicating the procedure up to this point. Attention to remove the iPhone from DFU mode (Home + Power for 7 / 8 seconds).



5th Once everything is completed, press again "ENTER" and expect to finish the program to work. Notifies us, then, that the iPhone will have a white screen and we will call to restore (with the firmware previously downloaded) via iTunes.



6. Then open iTunes, expect that the program detects the iPhone or iPod in recovery mode, press "SHIFT + Restore" by selecting the custom firmware you downloaded previously. We await the end of the process and let's enjoy our firmware 3.1 beta 3 with Cydia installed!

NOTE: ALL owners of iPhone 3G foreigner must NOT perform this procedure. Restoration of the software to the new firmware version includes the update of Baseband and hence the impossibility of using ultrasn0w probably forever.

ALL HOLDERS OF IPHONE EDGE: All those who own an iPhone 2G you will find the telephone blocked at the end of the procedure. This is normal because during the restoration does not run the program release. To remedy the problem, follow these simple steps:

• Open Cydia;
  
• Change to the tab "Changes" and run all the updates;
  
• Reboot and reopen Cydia;
  
• Change to the tab "Search" and type "BootNeuter"
  
• Download and run the program;
  
• Select all the entries in the screenshot below and click "Flash". Wait and do nothing and as soon as the procedure is finished, enjoy your EDGE iPhone unlocked and jailbroken with firmware 3.1 beta 3.

The procedure was tested on my iPhone 3G successfully. I thank the developer of iH8sn0w that these days he has worked hard to complete the project. Good release!



this tutorial is from iSpazio [google translate]

[chris102192]

Damn, why isn't anyone working on the 3gs..
I almost hate updating because no one wants to do it

[chris102192]

Damn, why isn't anyone working on the 3gs..
I almost hate updating because no one wants to do it

[sqrt36]

why would this relock the 2G after restoring. Doesnt make any sense

[sqrt36]

why would this relock the 2G after restoring. Doesnt make any sense

[jusnutts]

is the iphone 3g 3.1 b3 unlockable cause i read some where that it is not unlockable as yet

[jusnutts]

is the iphone 3g 3.1 b3 unlockable cause i read some where that it is not unlockable as yet

[coder]

jusnutts said:

is the iphone 3g 3.1 b3 unlockable cause i read some where that it is not unlockable as yet

No it is not unlockable in 3.1

---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------

sh@nks said:

why would this relock the 2G after restoring. Doesnt make any sense

it should not relock the 2G as there should be no baseband update because the 2g is no longer a supported device by apple

[coder]

jusnutts said:

is the iphone 3g 3.1 b3 unlockable cause i read some where that it is not unlockable as yet

No it is not unlockable in 3.1

---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------

sh@nks said:

why would this relock the 2G after restoring. Doesnt make any sense

it should not relock the 2G as there should be no baseband update because the 2g is no longer a supported device by apple

[eloco]

Do ultrasn0w work in 3.1 firmware? Sorry for my ignorance.

[eloco]

Do ultrasn0w work in 3.1 firmware? Sorry for my ignorance.

[sqrt36]

coder said:

No it is not unlockable in 3.1

---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------



it should not relock the 2G as there should be no baseband update because the 2g is no longer a supported device by apple

right but in the directions he says that it will relock it :P

and no there is no unlock method for 3.1 for the 3g/s

[sqrt36]

coder said:

No it is not unlockable in 3.1

---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------



it should not relock the 2G as there should be no baseband update because the 2g is no longer a supported device by apple

right but in the directions he says that it will relock it :P

and no there is no unlock method for 3.1 for the 3g/s

[igreky]

Hi, after all this proccess I cant active my iPhone , gettin massage “We’re unable to complete your activation. This device is not registered as part of the iPhone Developer Program.If you are a member of Program, please register your device in the iPhone Developer Program Portal.” Help me please!!!!

[sqrt36]

igreky said:

Hi, after all this proccess I cant active my iPhone , gettin massage “We’re unable to complete your activation. This device is not registered as part of the iPhone Developer Program.If you are a member of Program, please register your device in the iPhone Developer Program Portal.” Help me please!!!!

this doesnt hacktivate you need to have a developer add your phone so you can activate in itunes

[darth2499]

is there appsync for 3.1

[Azimi]

Thanx a Loooooooooooooooooot

[Surenix]

Added to the xSellize Guides Glossary

To view the glossary, click here: http://www.xsellize.com/showthread.php?t=59138
Thanks a lot for the guide!